Sanding wood components is often done on a machine called a Timesaver Sander. The
reference surface is the flat belt that takes the product into the sanding area. For a
uniform sanding of the wood surface the part must lie reasonably flat on the Timesaver
belt. At regular intervals flatness is checked at an inspection station prior to sanding. The
project team investigating whether the product flatness could be leading to defects
decided to verify the ability to measure flatness. The data given below is from their study.
a) Decide whether the team has a measurement system problem and what should be done
about it.
Note: Show all calculations and formula used
Part
Number
Curt Michelle Faisal
1 1.10 1.10 1.15
1 1.10 1.10 1.15
2 1.35 1.30 1.30
2 1.35 1.40 1.30
3 1.20 1.20 1.15
3 1.10 1.20 1.15
4 1.00 1.00 1.00
4 1.00 1.00 1.00
5 0.75 0.85 0.85
5 0.70 0.85 0.85
6 0.70 0.65 0.80
6 0.50 0.75 0.70
7 1.50 1.55 1.45
7 1.45 1.50 1.45
8 0.20 0.20 0.00
9 1.10 1.20 1.10
9 1.10 1.25 1.15
10 1.35 1.35 1.30
10 1.40 1.40 1.29
Recent Comments